| 1 |
Prediction of fouling tendency in PHE by data of on-site monitoring. Case study at sugar factory |
Demirskiy, Olexiy V.; Kapustenko, Petro O.; Arsenyeva, Olga P.; Matsegora, Olexandr I.; Pugach, Yana A. |
APPLIED THERMAL ENGINEERING |
2018 |
2
|
| 2 |
Incorporating fouling model in plate heat exchanger modelling and design |
Demirskyy, Olexiy; Kapustenko, Petro; Arsenyeva, Olga; Matsegora, Olexandr; Arsenyev, Pavlo; Tovazhnianskyi, Vladimir; Khusanov, Alisher |
28TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING |
2018 |
0
|
| 3 |
Two types of welded plate heat exchangers for efficient heat recovery in industry |
Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Khavin, Genadii L.; Yuzbashyan, Anna P.; Arsenyev, Pavlo Yu. |
APPLIED THERMAL ENGINEERING |
2016 |
8
|
| 4 |
Utilisation of waste heat from exhaust gases of drying process |
Arsenyeva, Olga P.; Cucek, Lidija; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Savchenko, Yana A.; Kusakov, Sergey K.; Matsegora, Oleksandr I. |
FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING |
2016 |
9
|
| 5 |
Process Integration of Heat Utilised from Exhaust Gases |
Arsenyeva, Olga P.; Klemes, Jiri J.; Cucek, Lidija; Kapustenko, Petro O.; Savchenko, Yana |
26TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING (ESCAPE), PT B |
2016 |
0
|
| 6 |
Heat Transfer and Pressure Drop in Cross-Flow Welded Plate Heat Exchanger for Ammonia Synthesis Column |
Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Perevertaylenko, Olexandr Y.; Khavin, Genadiy L.; Arsenyeva, Olga P.; Arsenyev, Pavlo Y.; Khusanov, Alisher E. |
PRES2016: 19TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELING AND OPTIMIZATION FOR ENERGY SAVINGS AND POLLUTION REDUCTION |
2016 |
0
|
| 7 |
Investigation of Fouling in Plate Heat Exchangers at Sugar Factory |
Demirskyy, Olexiy V.; Kapustenko, Petro O.; Khavin, Gennadii L.; Arsenyeva, Olga P.; Matsegora, Olexandr I.; Kusakov, Sergey K.; Bocharnikov, Igor O.; Tovazhnianskyi, Vladimir I. |
PRES2016: 19TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELING AND OPTIMIZATION FOR ENERGY SAVINGS AND POLLUTION REDUCTION |
2016 |
1
|
| 8 |
Searches of cost effective ways for amine absorption unit design in CO2 post-combustion capture process |
Perevertaylenko, Olexander Yu.; Gariev, Andriy O.; Damartzis, Theodoros; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Arsenyeva, Olga P. |
ENERGY |
2015 |
8
|
| 9 |
Integration Processes of Benzene-toluene-xylene Fractionation, Hydrogenation, Hydrodesulphurization and Hydrothermoprocessing on Installation of Benzene Unit |
Kapustenko, Petro O.; Ulyev, Leonid M.; Ilchenko, Mariia V.; Arsenyeva, Olga P. |
PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION |
2015 |
0
|
| 10 |
Shell-and-Plate Heat Exchangers for Efficient Heat Recovery under the Industrial Application |
Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Khavin, Genadii L.; Yuzbashyan, Anna |
PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION |
2015 |
0
|
| 11 |
Intensification of Heat Transfer Processes |
Kapustenko, Petro O.; Kukulka, David J.; Arsenyeva, Olga P. |
PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION |
2015 |
1
|
| 12 |
Minimum heat transfer area for Total Site heat recovery |
Boldyryev, Stanislav; Varbanov, Petar Sabev; Nemet, Andreja; Klemes, Jiri Jaromir; Kapustenko, Petro |
ENERGY CONVERSION AND MANAGEMENT |
2014 |
18
|
| 13 |
Generalised semi-empirical correlation for heat transfer in channels of plate heat exchanger |
Arsenyeva, Olga P.; Toyazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Demirskiy, Oleksiy V. |
APPLIED THERMAL ENGINEERING |
2014 |
9
|
| 14 |
Heat exchangers for energy recovery in waste and biomass to energy technologies - I. Energy recovery from flue gas |
Kilkovsky, Bohuslav; Stehlik, Petr; Jegla, Zdenek; Tovazhnyansky, Leonid L.; Arsenyeva, Olga; Kapustenko, Petro O. |
APPLIED THERMAL ENGINEERING |
2014 |
19
|
| 15 |
About the Possibilities of the Heat Exchangers Network Retrofit for Post-Combustion CO2 Capture Unit Without Stream Split |
Perevertaylenko, Oleksandr Yu.; Gariev, Andrii O.; Damartzis, Theodoros; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Arsenyeva, Olga P. |
PRES 2014, 17TH CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1-3 |
2014 |
0
|
| 16 |
The Development of Heat Substation for Drying Waste Heat Utilisation |
Garieva, Andrii O.; Klemes, Jiri J.; Kusakov, Sergey.K.; Tovazhnyansky, Leonid L.; Anokhin, Petr; Kapustenko, Petro O.; Arsenyeva, Olga P.; Cucek, Lidija |
PRES 2014, 17TH CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1-3 |
2014 |
3
|
| 17 |
New developments in Heat Integration and intensification, including Total Site, waste-to-energy, supply chains and fundamental concepts |
Klemes, Jiri Jaromir; Varbanov, Petar Sabev; Kapustenko, Petro |
APPLIED THERMAL ENGINEERING |
2013 |
19
|
| 18 |
The influence of plate corrugations geometry on plate heat exchanger performance in specified process conditions |
Arsenyeva, O.; Kapustenko, P.; Tovazhnyanskyy, L.; Khavin, G. |
ENERGY |
2013 |
21
|
| 19 |
Energy efficiency of complex technologies of phosphogypsum conversion |
Tovazhnyansky, L.L.; Meshalkin, V.P.; Kapustenko, P.O.; Bukhkalo, S.I.; Arsenyeva, O.P.; Perevertaylenko, O.Yu. |
THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING |
2013 |
1
|
| 20 |
Total Site Integration for Coke Oven Plant |
Ulyev, Leonid M.; Kapustenko, Petro A.; Vasilyev, Mikhail A.; Boldyryev, Stanislav A. |
16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) |
2013 |
3
|
| 21 |
The Precise Definition of the Payload Tube Furnaces for Units of Primary Oil Refining |
Ulyev, Leonid M.; Kapustenko, Petro O.; Melnykovskaya, Liana A.; Nechyporenko, Darina D. |
16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) |
2013 |
0
|
| 22 |
The Modified Analogy of Heat and Momentum Transfers for Turbulent Flows in Channels of Plate Heat Exchangers |
Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Demirskiy, Oleksiy V. |
16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) |
2013 |
3
|
| 23 |
A Multi-Level Mathematical Model of the CO Catalytic Conversion Process |
Ved, Olena V.; Seferlis, Panos; Kapustenko, Petro O. |
16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) |
2013 |
2
|
| 24 |
CFD Modelling of Hydrodynamics and Heat Transfer in Channels of a PHE |
Stogiannis, Ioannis A.; Paras, Spiros V.; Arsenyeva, Olga P.; Kapustenko, Petro O. |
16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) |
2013 |
4
|
| 25 |
Process Integration for Energy Saving in Buildings and Building Complexes |
Kapustenko, Petro O.; Arsenyeva, Olga P. |
HANDBOOK OF PROCESS INTEGRATION (PI): MINIMISATION OF ENERGY AND WATER USE, WASTE AND EMISSIONS |
2013 |
1
|